Solar Array Wiring Kit (Single/Dual/Ground Deploy Array Options)

The Single Roof Array Wiring Kit is designed to wire a single solar array from your roof down through the Roof Entry Gland to the Solar Isolator and to your Charge Controller. In addition to this kit, you will need to purchase the length of 10AWG Solar Wire needed, along with PV Connectors, PV Branch Connectors, and PV Fuses as needed in your solar array.

Note: Orders placed before 6/20/2024 included the dual solar isolator disconnect

The Dual Roof Array Wiring Kit is designed to wire two solar arrays from your roof down through two Roof Entry Glands to the Solar Isolator and to the two Charge Controllers. In addition to this kit, you will need to purchase the length of 10AWG Solar Wire needed, along with PV Connectors, PV Branch Connectors, and PV Fuses as needed in your solar arrays.

The Single Roof and Single Ground Array Wiring Kit is designed to wire one solar array from your roof down through the Roof Entry Gland to the Solar Isolator as well as one ground deploy solar array through the Ground Deploy Port to the Solar Isolator. Both arrays would be wired to the Solar Isolator and then to the two Charge Controllers. In addition to this kit, you will need to purchase the length of 10AWG Solar Wire needed, along with PV Connectors, PV Branch Connectors, and PV Fuses as needed in your solar arrays.

The Single Roof Array Wiring Kit is designed for campers that come from the factory as “solar ready.” This kit includes everything you need to wire a single solar array from your roof down through the factory installed roof entry gland to the Solar Isolator and to your Charge Controller. In addition to this kit, you will need to purchase the length of 10AWG Solar Wire needed, along with PV Connectors, PV Branch Connectors, and PV Fuses as needed in your solar array.

Note: Orders placed before 6/20/2024 included the dual solar isolator disconnect

The Add-On Ground Deploy Array Wiring Kit is designed to wire a ground deploy solar array to your existing Solar Isolator and to your second Charge Controller for the Ground Deploy. In addition to this kit, you will need to purchase the length of 10AWG Solar Wire needed, along with PV Connectors, PV Branch Connectors, and PV Fuses as needed in your solar array.

The Add-On Second Roof Array Wiring Kit is designed to wire a secondary roof solar array to your existing Solar Isolator and to your second Charge Controller for the second array. In addition to this kit, you will need to purchase the length of 10AWG Solar Wire needed, along with PV Connectors, PV Branch Connectors, and PV Fuses as needed in your solar array.

• Solar Isolator Disconnect For Dual Array
  • Cable Gland Size: M25 x 1.5
  • Max Voltage: 1000V
  • Max Current: 63A
  • Color: Grey
  • Protection Degree: IP66
• Solar Isolator Breaker for Single Array
  • Max Voltage: 500V
  • Max Current: 32A
  • Color: Grey
  • Protection Degree: IP65
• 10 AWG Ferrule
  • Size: 10 gauge (AWG)
  • Type: Tin Plated Copper
  • Max Voltage: 600V
  • Temperature Rating: 105°C
• Roof Entry Gland
  • Dimensions: 3 3/4″W x 4 1/2″L x 1 1/2″H
  • UV Resistant
  • ABS Plastic
• M25 Cable Gland
  • Type: M25
  • Cable Diameter: 10 – 15mm
  • Waterproof rated to IP68
• Solar Grommet
  • Inside Diameter: 3/4″
  • Drill Hole: 1″ or 25mm
  • Material: Rubber
• Solar Ground Deploy Plug
  • Type: 2-Pin
  • Max Current: 50A
  • Max Voltage: 500VAC
  • IP67 Waterproof
  • Panel Mount: Socket with Nut