Lynx Distributor Wiring Kit

Description

The Lynx Distributor wiring kit includes everything you need to connect the Lynx Distributor to the battery bank and either Lynx Shunt or BMV-712 (Lynx Distributor, Lynx Shunt, and BMV-712 Battery Monitor sold separately). See videos below for installation instructions.

Tech Note:

Temporary Substitute for BEP 770-EZ Mount On/Off Switch (Published 8/17/26)

Pre-Crimped (PRO) vs. Un-Crimped (DIY)

Pre-Crimped (PRO): All cable ends are professionally crimped, labeled, and heat-shrunk by our team for a clean, ready-to-install setup. No crimping tools or extra prep needed—just connect and go.

Un-Crimped (DIY): Includes the same high-quality components, but cables arrive with loose terminals for those who prefer to cut, route, and crimp their own connections during installation. Perfect for full customization or unique layouts.

✅ Choose the Pre-Crimped (PRO) version of this wiring kit to receive cables with terminals professionally crimped and finished by our team. You’ll get the same high-quality components, with the added convenience of ready-to-install cables—perfect for those who want a clean, professional-grade installation without needing to do the crimping themselves.

---

Kit Contents:

Each kit includes the appropriate size and quantities of the following:

Lynx Distributor (M10) Wiring Kits:

NOTE: Lynx Distributor (M10) wiring kits include parts to install either a Victron Lynx Shunt, SmartShunt, or BMV-712. Depending on which shunt is used, you may have screws and/or bolts/nuts/washers left over after your installation.

Lynx Distributor (M10) – 4/0 Wire (Class T Fuse)

4/0 Red Battery Wire	5ft
4/0 Black Battery Wire	5ft
4/0 x 5/16″ Wire Lugs	4
4/0 x 3/8″ Wire Lugs	2
1″ Red Heat Shrink	4
1″ Black Heat Shrink	2
400 Amp Class T Fuse	1
Blue Sea Systems Class T Fuse Holder with Insulating Cover – 225-400A	1
BEP 770-EZ Mount On/Off Switch	1
18 – 22 AWG Butt Splice Connector	1
Brass Hex Head Screw (M10)	1
Mounting Hardware and Custom Spacers – Lynx Distributor	1pk
Mounting Hardware – Class T Fuse Holder	1pk
Mounting Hardware and Spacers – BEP 770-EZ Switch	1pk
Mounting Hardware and Custom Spacers – Lynx Shunt*	1pk
Lynx Shunt Hardware*	1pk
Mounting Hardware and Spacers – BMV-712 Shunt/SmartShunt*	1pk
*Note: Shunt hardware will vary depending on whether a BMV/SmartShunt or Lynx Shunt is used in the system.

Lynx Distributor (M10) – 4/0 Wire (ANL Fuse)

4/0 Red Battery Wire	5ft
4/0 Black Battery Wire	5ft
4/0 x 5/16″ Wire Lugs	4
4/0 x 3/8″ Wire Lugs	2
1″ Red Heat Shrink	4
1″ Black Heat Shrink	2
400A ANL Fuse	1
ANL Fuse Holder	1
BEP 770-EZ Mount On/Off Switch	1
18 – 22 AWG Butt Splice Connector	1
Brass Hex Head Screw (M10)	1
Mounting Hardware and Custom Spacers – Lynx Distributor	1pk
Mounting Hardware – Class T Fuse Holder	1pk
Mounting Hardware and Spacers – BEP 770-EZ Switch	1pk
Mounting Hardware and Custom Spacers – Lynx Shunt*	1pk
Lynx Shunt Hardware*	1pk
Mounting Hardware and Spacers – BMV-712 Shunt/SmartShunt*	1pk
*Note: Shunt hardware will vary depending on whether a BMV/SmartShunt or Lynx Shunt is used in the system.

Lynx Distributor (M10) – 2/0 Wire

2/0 Red Battery Wire	5ft
2/0 Black Battery Wire	5ft
2/0 x 5/16″ Wire Lugs	2
2/0 x 3/8″ Wire Lugs	2
3/4″ Red Heat Shrink	2
3/4″ Black Heat Shrink	2
300A MRBF Terminal Fuse	1
MRBF 30-300A Terminal Fuse Block – Single	1
BEP 770-EZ Mount On/Off Switch	1
18 – 22 AWG Butt Splice Connector	1
Brass Hex Head Screw (M10)	1
Mounting Hardware and Custom Spacers – Lynx Distributor	1pk
Mounting Hardware and Spacers – BEP 770-EZ Switch	1pk
Mounting Hardware and Custom Spacers – Lynx Shunt*	1pk
Lynx Shunt Hardware*	1pk
Mounting Hardware and Spacers – BMV-712 Shunt/SmartShunt*	1pk
*Note: Shunt hardware will vary depending on whether a BMV/SmartShunt or Lynx Shunt is used in the system.

Lynx Distributor (M10) – 1/0 Wire

1/0 Red Battery Wire	5ft
1/0 Black Battery Wire	5ft
1/0 x 5/16″ Wire Lugs	2
1/0 x 3/8″ Wire Lugs	2
3/4″ Red Heat Shrink	2
3/4″ Black Heat Shrink	2
300A MRBF Terminal Fuse	1
MRBF 30-300A Terminal Fuse Block – Single	1
BEP 770-EZ Mount On/Off Switch	1
18 – 22 AWG Butt Splice Connector	1
Brass Hex Head Screw (M10)	1
Mounting Hardware and Custom Spacers – Lynx Distributor	1pk
Mounting Hardware and Spacers – BEP 770-EZ Switch	1pk
Mounting Hardware and Custom Spacers – Lynx Shunt*	1pk
Lynx Shunt Hardware*	1pk
Mounting Hardware and Spacers – BMV-712 Shunt/SmartShunt*	1pk
*Note: Shunt hardware will vary depending on whether a BMV/SmartShunt or Lynx Shunt is used in the system.

---

How to Install a Victron Lynx Distributor:

Wiring Diagrams for Victron Lynx Distributor:

Click to expand Lynx Distributor (M10) Wiring Diagram 4/0 SmartShunt or BMV712 (Class T Fuse):

Click to expand Lynx Distributor (M10) Wiring Diagram 4/0 SmartShunt or BMV712 (ANL Fuse):

Click to expand Lynx Distributor (M10) Wiring Diagram 4/0 Lynx Shunt (Class T Fuse):

Click to expand Lynx Distributor (M10) Wiring Diagram 4/0 Lynx Shunt (ANL Fuse):

Click to expand Lynx Distributor (M10) Wiring Diagram 2/0 SmartShunt or BMV712:

Click to expand Lynx Distributor (M10) Wiring Diagram 2/0 Lynx Shunt:

Click to expand Lynx Distributor (M10) Wiring Diagram 1/0 SmartShunt or BMV712:

Click to expand Lynx Distributor (M10) Wiring Diagram 1/0 Lynx Shunt:

---

Detailed Product Information:

• 4/0 Wire (red and black):
  • Size: 0000 gauge (4/0 AWG)
  • Type: Fully annealed soft-drawn copper SGR
  • Insulation: Highly flexible EPDM
  • Temperature Rating: -50°C to +105°C
  • Max Voltage: 60V
• 4/0 x 5/16″ Wire Lug
  • Size: 4/0 AWG
  • Type: Standard Bare Copper
  • Size: 5/16″
• 4/0 x 3/8″ Wire Lug
  • Size: 4/0 AWG
  • Type: Standard Bare Copper
  • Size: 3/8″
• 400 Amp ANLFuse
  • Current Rating: 400A
  • Voltage Rating: 32V
  • Type: Bolt Down Fuse
  • Terminal: Silver Plated Copper
• Blue Sea Systems 6006 m-Series Battery Switch
  • 2 Switch Positions
  • Max Voltage: 48V
  • Amperage Rating: Continuous at 300A. Intermittent of 500A (5 minutes)
• Blue Sea Systems 5503 ANL Fuse Block
  • Amperage Rating: 35A to 750A
  • Max Voltage: 32V
  • UL 94-V0
  • Tin-Plated Copper Terminals
  • Max Cable Size: 4/0 AWG
  • Terminal Stud Size: 5/16-18 (M8)