EXPLORE LITE CAMPER VAN ELECTRICAL SYSTEM WIRING KIT
From: $2,949.99
The EXPLORE LITE Camper Van Electrical System Wiring Kit is a comprehensive 200Ah 2kVa camper electrical system that includes everything you need to power your camper. From the inverter and batteries all the way down to the lugs and mounting screws, we’ve included it ALL.
Click the arrow 
next to each kit name for specifics on what is included in the kit.
START WITH YOUR BASE KIT #1 BELOW:
Description
EXPLORE LITE CAMPER VAN ELECTRICAL SYSTEM WIRING KIT
The EXPLORE LITE Camper Van Electrical System Wiring Kit is a comprehensive 200Ah 2kVa DIY camper electrical system that includes everything you need to power your camper. From the inverter and batteries all the way down to the lugs and mounting screws, we’ve included it ALL.
This is the DIY camper van electrical system wiring kit featuring a Victron Multiplus 2000VA Inverter/Charger, as shown in this diagram.
The EXPLORE LITE Camper Van Electrical System Wiring Kit includes:
- Victron MultiPlus 12/2000 80-50 120V Inverter/Charger
- 200Ah of Battle Born LiFePO4 Batteries
- Victron Lynx Distributor
- Victron BMV-712 Monitoring
- Optional Cerbo GX Advanced Monitoring
- Victron VE.Bus Smart Dongle
- Progressive Dynamics 120V AC Distribution Panel
- Progressive Dynamics 12V DC Fuse Panel
- 30A Shore Power Inlet (Black)
- Victron SmartSolar MPPT 100|30 Solar Charge Controller
- Optional Two (2) Rich Solar 200W 12V Solar Panels
- Victron Orion XS 12V-12V | 50A Non-Isolated DC-DC Charger
- And EVERYTHING needed to install these components
See below for the full list of everything that is included.
Camper electrical systems are hard. We sweat the small stuff so you don’t have to.
Our EXPLORE LITE Camper Van Electrical System Wiring Kit includes everything you need to install a robust electrical system in your Camper Van. The included high-resolution wiring diagram shows you the exact connections, down to the lug and heat shrink size, for every connection. There is truly not a more comprehensive DIY camper van wiring kit on the market!
A high-resolution wiring diagram along with installation instructions will be emailed to you after your purchase is complete.
Included in the EXPLORE LITE Camper Van Electrical System Wiring Base Kit:
INCLUDED COMPONENTS (click to expand)
| INCLUDED COMPONENTS | QTY |
| Victron Multiplus 12/2000/80-50 VE.Bus Inverter/Charger | 1 |
| Victron Orion XS 12V-12V | 50A Non-Isolated DC-DC Charger | 1 |
| Victron Lynx Distributor | 1 |
| Victron BMV-712 Battery Monitor | 1 |
| Victron SmartSolar MPPT 100|30 | 1 |
| 12V DC Fuse Panel – Progressive Dynamics | 1 |
| 120V AC Distribution Panel – Progressive Dynamics | 1 |
| Victron VE.Bus Smart Dongle | 1 |
| Victron RJ45 UTP Cable – 0,3m | 1 |
| Solar Isolator Disconnect | 1 |
| 30 Amp Shore Power Inlet (Black) | 1 |
| Blue Sea m-6006 Master Disconnect Switch | 1 |
INCLUDED WIRING (click to expand)
| COMPONENT | QTY |
| 2/0 AWG SGR Battery Wire – Red | 11ft |
| 2/0 AWG SGR Battery Wire – Black | 21ft |
| 4 AWG SGX Battery Wire – Red | 20ft |
| 4 AWG SGX Battery Wire – Black | 20ft |
| 6 AWG SGX Battery Wire – Red | 35ft |
| 6 AWG SGX Battery Wire – Black | 38ft |
| 6/3 SOOW Triplex Wire – Black | 10ft |
| 10 AWG Triplex Marine Wire | 10ft |
| 10 AWG PV Solar Wire – Black | 20ft |
| 10 AWG PV Solar Wire – Red | 20ft |
INCLUDED FUSES & BREAKERS (click to expand)
| COMPONENT | QTY |
| 300 Amp MRBF Fuse | 1 |
| MRBF 30-300A Terminal Fuse Block – Single | 1 |
| 300 Amp MEGA Fuse | 1 |
| 50 Amp HOM Breaker | 1 |
| 100 Amp MEGA Fuse | 1 |
| 60 Amp MEGA Fuse | 2 |
| 60 Amp DC Circuit Breaker | 1 |
INCLUDED LUGS, FERRULES, ETC. (click to expand)
| COMPONENT | QTY |
| 2/0 x 5/16″ Wire Lug | 14 |
| 2/0 x 3/8″ Wire Lug | 2 |
| 4 AWG x 5/16″ Wire Lug | 7 |
| 4 AWG x 1/4″ Wire Lug | 2 |
| 6 AWG x 5/16″ Wire Lug | 5 |
| 6 AWG x 1/4″ Wire Lug | 1 |
| 6 AWG Insulated Ferrule | 8 |
| 6 AWG Non-Insulated Ferrule | 6 |
| 10 AWG Insulated Ferrule | 3 |
| 10 AWG Non-Insulated Ferrule | 6 |
| 18 – 22 AWG Butt Splice Connector | 1 |
INCLUDED CONNECTORS, GLANDS, ETC. (click to expand)
| COMPONENT | QTY |
| PG29 Cable Gland | 1 |
| Solar Grommet | 1 |
| Roof Entry Gland | 1 |
| Lynx Adapters | 1 pair |
| PV Connectors | 2 |
INCLUDED HEAT SHRINK (click to expand)
| COMPONENT | QTY |
| 1″ Black Heat Shrink | 1 pc |
| 3/4″ Black Heat Shrink | 10 pcs |
| 3/4″ Red Heat Shrink | 6 pcs |
| 1/2″ Black Heat Shrink | 10 pcs |
| 1/2″ Red Heat Shrink | 7 pcs |
| 3/8″ Black Heat Shrink | 3 pc |
| 3/8″ Red Heat Shrink | 3 pc |
INCLUDED MOUNTING SCREWS/HARDWARE (click to expand)
| COMPONENT | QTY |
| AC Panel Mounting Hardware | 1 pk |
| Charge Controller Mounting Hardware | 1 pk |
| Chassis Ground Hardware | 1 pk |
| DC Panel Mounting Hardware | 1 pk |
| Lynx Distributor Mounting Hardware | 1 pk |
| Master Disconnect Mounting Screws and Spacers | 1 pk |
| Multiplus Mounting Hardware | 1 pk |
| Orion XS Mounting Hardware | 1 pk |
| Shore Power Inlet Mounting Hardware | 1 pk |
| Shunt (BMV) Mounting Screws and Spacers | 1 pk |
| Solar Isolator Mounting Hardware | 1 pk |
WHEW! That’s a lot…
But it is absolutely everything you need to install your camper electrical system. And even better, you won’t have a bunch of left over random parts that you’ll never use. We cut the waste so you can save time, money, and worry.
You get all of this in clearly labeled bags to help you stay organized during your camper electrical installation.
Options for Advanced Monitoring
The EXPLORE LITE Camper Van Electrical System Wiring Kit by default includes monitoring with a Cerbo GX and Touch 50 screen. You have the option to upgrade to a Touch 70 screen, or remove this monitoring and use the BMV-712 only.
OPTIONAL MONITORING (click to expand)
Cerbo GX + Touch 50 Advanced Monitoring Default (click to expand)
| COMPONENT | QTY |
| Victron Cerbo GX | 1 |
| Victron GX Touch 50 | 1 |
| Victron GX Touch 50 Wall Mount | 1 |
| Victron RJ45 UTP Cable – 3m | 1 |
| Victron VE.Direct Cable – 3m | 2 |
| TOTAL OPTIONAL MONITORING | $554.20 |
Cerbo GX + Touch 70 Advanced Monitoring Default (click to expand)
| COMPONENT | QTY |
| Victron Cerbo GX | 1 |
| Victron GX Touch 70 | 1 |
| Victron GX Touch 70 Wall Mount | 1 |
| Victron RJ45 UTP Cable – 3m | 1 |
| Victron VE.Direct Cable – 3m | 2 |
| TOTAL OPTIONAL MONITORING | $663.00 |
Solar Panel Options
The EXPLORE LITE Camper Van Electrical System Wiring Kit is designed to work with a 400W solar array. The default kit includes connections for 2x200W Rich Solar Monocrystalline Solar Panels. However, if you have a different array need, select from the following options.
SOLAR ARRAY OPTIONS (click to expand)
RICH SOLAR 200W PANELS X 2
| COMPONENT | QTY |
| Rich Solar MEGA 200W 12V Monocrystalline Solar Panel | 2 |
| Default Selections | |
| TOTAL Rich Solar 200W Panels x 2 | $439.98 |
RICH SOLAR 100W PANELS X 4
| COMPONENT | QTY |
| Rich Solar MEGA 100W 12V Monocrystalline Solar Panel | 4 |
| Additional PV Connectors | 5 |
| 2-to-1 PV Branch Connector | 1 |
| 10A PV Fuse | 2 |
| TOTAL Rich Solar 100W Panels x 4 | $493.38 |
Battery Options
The EXPLORE LITE Camper Van Electrical System Wiring Kit is designed to work seamlessly with 2 x 100Ah Battle Born Lithium Batteries.
However, it can also work with the following options, or any high quality lithium battery (minimum of 200Ah needed).
BATTERY OPTIONS (click to expand)
BATTLE BORN 100AH BATTERIES X 2
| COMPONENT | QTY |
| Battle Born 100AH LiFePO4 Battery | 2 |
| Default Selections | |
| TOTAL Battle Born 100Ah Batteries x 2 | $1,850.00 |
BATTLE BORN 100AH BATTERIES X 3
| COMPONENT | QTY |
| Battle Born 100AH LiFePO4 Battery | 3 |
| Additional Wiring, Lugs, and Heat Shrink | 1 |
| TOTAL Battle Born 100Ah Batteries x 3 | $2,799.99 |
BATTLE BORN 100AH BATTERIES X 4
| COMPONENT | QTY |
| Battle Born 100AH LiFePO4 Battery | 4 |
| Additional Wiring, Lugs, and Heat Shrink | 1 |
| TOTAL Battle Born 100Ah Batteries x 4 | $3,749.98 |
BATTLE BORN 270AH BATTERY X 1
| COMPONENT | QTY |
| Battle Born 270AH GC3 LiFePO4 Battery | 1 |
| TOTAL Battle Born 270Ah GC3 Battery x 1 | $2,499.00 |
Enclosure Options
The EXPLORE LITE Camper Van Electrical System Wiring Kit has a custom designed electrical enclosure that fits your vehicle and your system perfectly. Choose your enclosure options, or opt out if you would prefer to build your own electrical enclosure.
ELECTRICAL ENCLOSURE OPTIONS (click to expand)
| Black Hex Plywood Enclosure | $995.00 |
| White Laminate Enclosure | $1,500.00 |
| Natural Plywood (unfinished) | $850.00 |
CAMPER VAN ELECTRICAL SYSTEM WIRING KIT FULL TUTORIAL:
Installation tutorial shown in the video below shows the same concepts in a different system. Some products may vary.
Additional information
| Battery Bank Voltage | 12V |
|---|---|
| Application | Camper Van |
| Shore Power Amperage | 30A |
Related products
-
Truck Camper Electrical Upgrade 300Ah Battery Bank – Multiplus 2k 12v – 400W Solar – Orion 12-12 | 30
From: $0.00 Select options -
EXPLORE LITE TRANSIT ELECTRICAL SYSTEM WIRING KIT
From: $2,949.99 Select options -
Travel Trailer Electrical Upgrade 270Ah Battery – Multiplus 2k 12v – 800W Solar – Orion 12-12 | 30
From: $0.00 Select options -
EXPLORIST.life Ford Transit 540Ah – 3k 24V Inverter – 580W to 1700W Dual Solar Array
From: $0.00 Select options
Reviews
There are no reviews yet.