Victron Quattro 24/5000 120-100 120V


This inverter/charger is recommended for use with 30A Shore Power Service.


Add the Programming Dongle:

Victron Energy Interface MK3-USB VE.Bus to USB-C

SKU: victron-quattro-24-5000-120-100 Categories: ,


Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Note: The minimum battery bank size for this inverter/charger to work properly is 400Ah at 24V (i.e. 800Ah 12V batteries)



The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Remote Monitoring and Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the VRM app and VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more…

Two AC Inputs & two AC Outputs

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

How to Wire an Inverter/Charger:

How Victron PowerAssist Works:

Technical Specifications (click to expand)
  • Input Voltage Range (V DC): 19 – 33 V
  • Output: 120V 60Hz
  • Cont. output power at 25ºC / 77°F (VA): 5000
  • Cont. output power at 25ºC / 77°F (W): 4000
  • Cont. output power at 40ºC / 104°F (W): 3700
  • Cont. output power at 65ºC / 150°F (W): 3000
  • Peak Power (W): 10000W

For additional Technical Specifications, please see:

Additional information

Weight 66 lbs
Dimensions 17.5 × 13 × 9.6 in

12V Battle Born LiFePO4 Batteries, None

Shore Power Amperage



There are no reviews yet.

Be the first to review “Victron Quattro 24/5000 120-100 120V”

Your email address will not be published. Required fields are marked *