Description
This wiring kit includes everything you need to connect an Inverter/Charger to a Victron Lynx Distributor. Victron Inverter/Chargers are not included, but can be purchased here. Optional add-on VE.Bus Smart Dongle allows you to turn the MultiPlus on/off and set the input current limit from your phone. Optional Cerbo GX and GX Touch 50/70 allows you to turn the MultiPlus on/off and set the input current limit from the touch screen. See videos below for installation instructions.
Each kit includes the appropriate sizes of the following:
Red Wire | 5ft |
Black Wire | 10ft |
Wire Lugs | 6 |
Red Heat Shrink | 2 |
Black Heat Shrink | 4 |
MEGA Fuse | 1 |
Inverter/Charger Mounting Screws | 1 pk |
How to Install a Victron Multiplus 3k 12V Inverter/Charger:
How to Install a Victron MultiPlus 3k 24V Inverter/Charger:
Product Information:
- 4/0 Wire (red and black):
- Size: 0000 gauge (4/0 AWG)
- Type: Fully annealed soft-drawn copper SGR
- Insulation: Highly flexible EPDM
- Temperature Rating: -50°C to +105°C
- Max Voltage: 60V
- 4/0 x 5/16″ Wire Lug
- Size: 4/0 AWG
- Type: Standard Bare Copper
- Size: 5/16″
- 2/0 Wire (red and black):
- Size: 00 gauge (2/0 AWG)
- Type: Fully annealed soft-drawn copper SGR
- Insulation: Highly flexible EPDM
- Temperature Rating: -50°C to +105°C
- Max Voltage: 60V
- 2/0 x 5/16″ Wire Lug
- Size: 2/0 AWG
- Type: Standard Bare Copper
- Size: 5/16″
- 1/0 Wire (red and black):
- Size: 0 gauge (1/0 AWG)
- Type: Fully annealed soft-drawn copper SGR
- Insulation: Highly flexible EPDM
- Temperature Rating: -50°C to +105°C
- Max Voltage: 60V
- 1/0 x 5/16″ Wire Lug
- Size: 1/0 AWG
- Type: Standard Bare Copper
- Size: 5/16″
- 400 Amp MEGA Fuse
- Current Rating: 400A
- Voltage Rating: 32V
- Type: Bolt Down Fuse
- Terminal: Copper
- 300 Amp MEGA Fuse
- Current Rating: 300A
- Voltage Rating: 32V
- Type: Bolt Down Fuse
- Terminal: Copper
Reviews
There are no reviews yet.